12
ProBlue Flex OEM User's Guide
Safety Labels and Tags
Part 1129255_01
Other Safety Precautions
S
Do not use an open flame to heat hot melt system components.
S
Check high-pressure hoses daily for signs of excessive wear, damage, or
leaks.
S
Never point a dispensing handgun at yourself or others.
S
Suspend dispensing handguns by their proper suspension point.
First Aid
If molten hot melt comes in contact with your skin:
1. Do NOT attempt to remove the molten hot melt from your skin.
2. Immediately soak the affected area in clean, cold water until the hot melt
has cooled.
3. Do NOT attempt to remove the solidified hot melt from your skin.
4. In case of severe burns, treat for shock.
5. Seek expert medical attention immediately. Give the SDS for the hot melt
to the medical personnel providing treatment.
Refer to the ProBlue Flex Core Customer Product Manual, P/N 1128350.
E 2020 Nordson Corporation