Defining Network Access - Nordson ProBlue Flex User Manual

Defining Network Access

SETUP TOOL
Please select how to load a configuration file
LOAD FROM USB/COMPUTER
USE PREVIOUS FILE
CREATE NEW
SYSTEM SETTINGS
NETWORKING
E 2020 Nordson Corporation
The following section details how to connect this melter to your network, so
you can remotely monitor and change melter settings.
1. Log into your BBconn Cloud account, then do the following:
S
Select SETUP TOOL - create or load a .NOR file.
S
Select SYSTEM SETTINGS | NETWORKING.
2. Select WIRED PUBLIC NETWORK.
3. Press the to toggle (enable or disable) the option. The default is
Disabled.
4. Decide if you want to use DHCP or not. The default is Disabled.
5. Enter the following information to continue.
S
Default Gateway: Default is 192.168.3.1
S
Public IP: Default is 192.168.3.1
S
Public Subnet IP: Default is 255.255.255.0
6. When done, select SAVE.
Notes:
S
If you enable DHCP, the other networking settings are grayed
out, as they are not needed. If you are not using DHCP, continue
to the next step.
S
Changes to any IP address requires you to reboot the melter.
ProBlue Flex OEM User's Guide
73
Part 1129255_01