Enabling And Disabling Auto Pump - Nordson ProBlue Flex User Manual

50
ProBlue Flex OEM User's Guide

Enabling and Disabling Auto Pump

SETUP TOOL
Please select how to load a configuration file
LOAD FROM USB/COMPUTER
USE PREVIOUS FILE
CREATE NEW
SYSTEM SETTINGS
PUMP
Part 1129255_01
S
To toggle the Master Pump control On, press
flashes.
S
If AutoPump is enabled, then the pump button will flash, indicating that
the Master Pump control will be toggled On as soon as system
temperature ready is achieved. If you press the Master Pump Control
button again, AutoPump becomes disabled, although only for this one
time. When the system temperature ready is achieved, the Master pump
Control remains Off. In this case, pushing the Master Pump Control
button again will switch the Master Pump Control On, since Temperature
Ready has already been achieved.
NOTE: The Master Pump Control LED flashes while waiting for Temperature
Ready. Once Temperature Ready is reached, the LED stops flashing and
remains illuminated.
CAUTION! When the pump running, the system becomes pressurized.
Enabling and Disabling Auto Pump
1. Log into your BBconn Cloud account, then do the following:
S
Select SETUP TOOL - create or load a .NOR file.
S
Select SYSTEM SETTINGS | PUMP.
2. Press the to toggle (enable or disable) the Auto Pump option. The
default is Enabled.
3. When done, select SAVE.
. The Pump LED
E 2020 Nordson Corporation