Theory Of Operation - Nordson ProBlue Flex User Manual

14
ProBlue Flex OEM User's Guide

Theory of Operation

Part 1129255_01
Since the ProBlue Flex OEM melter does not have a user interface, you must
use the BBconn Cloud web-based application to do the following:
S
Generate, maintain, and manage .NOR files which contain the daily
operational and system settings required for melter operation and
production, as well as for PLC setup and connectivity.
Note: Although you can have multiple .NOR files saved in your
BBconn Cloud account, only one .NOR file can be imported and used
on a melter at any one time.
S
To view real-time data, Event Log, Reports as well as to manage alert,
stop, and fault alarms, you can purchase one of the optional touch
screens from Nordson; (T50 Panel, part number 1129148 or the WP4070
Panel, part number 1129149). Alternatively, you can create your own
PLC ProBlue Flex user interface using the PLC Starter Kits that you can
download from the BBconn Cloud Media Center.
Note: You must use Nordson's PLC Mapping and Interface Setup
tool, to create a Flexible Map of ProBlue Flex commands that you can
use to create your PLC ProBlue Flex user interface. You can find this
tool by selecting the Communication Settings link, then selecting
PLC COMMUNICATIONS once you create or load a .NOR file.
S
Export a .NOR file from your BBconn Cloud account to other similarly
configured ProBlue Flex melters.
S
Import a .NOR file from your melter to view the Event Log and Reports for
troubleshooting purposes.
NOTE:
S
When transferring files between the melter and BBconn Cloud, the
USB drive must be formatted using FAT or FAT32. No other format,
such as NTFS and exFAT are supported.
E 2020 Nordson Corporation