About The Control Panel; Master Controls - Nordson ProBlue Flex User Manual

18
ProBlue Flex OEM User's Guide

About the Control Panel

Component
Master Pump On/Off
Button and LED
Master Heat On/Off
Button and LED
Wireless On/Off
Button and LED
System I/O or
PLC Communications
LED
Part 1129255_01
The OEM control panel is located on the E-Box door.

Master Controls

The Master Controls provide On/Off control and status LEDs for the pump,
heaters, wireless operation, and remote control operation.
Figure 2 Master controls
Table 2 OEM Control Panel Master Controls
State Function
Toggles the Master Pump control On or Off
S
The Master Pump control LED is illuminated when the
pump is On.
S
The LED flashes when the Auto Pump option is enabled
and when waiting for Temperature Ready. Once
Temperature Ready is reached, the LED stops flashing and
remains illuminated.
Toggles the Master Heat control On or Off
The LED is illuminated when the Master Heat control is On.
Illuminates when the optional WiFi card is installed, configured
and at least one user is connected.
The LED illuminates when an input is assigned or when the
melter is controlled from a PLC. When the Communications
Master Control is disabled, the LED is not illuminated and all
remote write access to the melter is blocked.
NOTE: You can still control the melter from the panel itself.
E 2020 Nordson Corporation