Defining Level Sensing Settings; Enabling/Disabling Low Level Alerts And Settings - Nordson ProBlue Flex User Manual

46
ProBlue Flex OEM User's Guide

Defining Level Sensing Settings

SETUP TOOL
Please select how to load a configuration file
LOAD FROM USB/COMPUTER
USE PREVIOUS FILE
CREATE NEW
SYSTEM SETTINGS
LEVEL/FILL
Part 1129255_01
This section of the manual details the following:
S
Enable/Disable Low Level Alert and Settings
S
Empty Stop
S
Enable/Disable Lid Open Alert and Settings

Enabling/Disabling Low Level Alerts and Settings

Use the Level Sensing settings to fine-tune the low/empty adhesive
messaging.
TIP:
S
You can also assign a system output for Tank Low and connect that to a
light tower.
1. Log into your BBconn Cloud account, then do the following:
S
Select SETUP TOOL - create or load a .NOR file.
S
Select SYSTEM SETTINGS | LEVEL/FILL.
2. Press the to toggle (enable or disable) the Low Level Threshold
option. The default is Enabled.
3. Select Low Level Threshold, and enter a value representing the
percentage of adhesive left in the tank before receiving a low level
message. The default is 25%, the minimum is 10%, and the maximum is
30%.
4. When done, select SAVE.
E 2020 Nordson Corporation