System Status Led Colors - Nordson ProBlue Flex User Manual

20
ProBlue Flex OEM User's Guide
System status LED
Part 1129255_01

System Status LED Colors

The system status LED shows at a glance the status of the system.
Table 4 System Status LED Color Indications
System
LED
State
Run
Idle
Alert
Fault
Color Description
S
No Alert or Fault condition exists.
All conditions have been met for
running production.
Green
S
The Master Pump and Heat
controls are On.
No Alert or Fault condition exists; the
melter is waiting for a run condition
to be met:
S
Master Heat is On (heating).
S
Master Pump is Off.
S
Temperature Ready, but one or
Blue
more of the master controls, such
as the Pump or an optional Fill
control, is Off.
S
Ready Delay is enabled and in
use.
S
Setback is enabled and/or in use.
S
An Alert condition exists, caused
by an issue with either the
system itself or a component.
Yellow
S
Although product is still being
produced, there may be issues
that require your attention.
S
A Fault condition exists, caused
by a failure of either the system
itself or a component.
When a fault occurs:
S
Red
The Master Pump and Heat
controls are automatically
toggled Off.
S
Production is halted until the
Fault condition is resolved.
Continued...
E 2020 Nordson Corporation