Pressure Runup Alert Threshold Settings - Nordson ProBlue Flex User Manual

SETUP TOOL
Please select how to load a configuration file
LOAD FROM USB/COMPUTER
USE PREVIOUS FILE
CREATE NEW
RUNTIME SETTINGS
PRESSURE
E 2020 Nordson Corporation
S
High Line Speed
Pressure Default
Meter/ 30.5
Minute
Feet/ 100
Minute
3. Select SAVE. Select Alert Threshold Settings to continue.

Pressure Runup Alert Threshold Settings

the maximum/minimum pressure thresholds you want the system to
Enter
use before
receiving an alert alarm.
NOTES:
S
An Alert Alarm is generated if the maximum or minimum pressure is out of
tolerance for more than 10 seconds.
S
An "+" symbol appears next to the High Pressure Alert threshold setting
indicating the offset or delta from the Maximum Pressure Set Point Range
setting.
S
An "-" symbol appears next to the Low Pressure Alert threshold setting
3indicating the offset or delta from the Minimum Pressure Set Point Range
setting.
1. Log into your BBconn Cloud account, then do the following:
S
Select SETUP TOOL - create or load a .NOR file.
S
Select RUNTIME SETTINGS | PRESSURE. From the Main Pressure
Mode Selection, select Runup.
2. Select Pressure Alert Threshold, and enter the following information:
S
High Pressure:
Pressure Default
PSI 70
BAR 4.83
kPa 483
S
Low Pressure:
Pressure Default
PSI 10
BAR 0.69
kPa 69
3. Select SAVE. Select Pressure Limits to continue.
ProBlue Flex OEM User's Guide
Minimum Maximum
1.5 300.2
5 985
Minimum Maximum
10 70
0.69 4.83
69 483
Minimum Maximum
10 70
0.69 4.83
69 483
35
Part 1129255_01