Trigger Settings - Nordson ProBlue Flex User Manual

SETUP TOOL
Please select how to load a configuration file
LOAD FROM USB/COMPUTER
USE PREVIOUS FILE
CREATE NEW
SYSTEM SETTINGS
FLOW
Setting
Trigger Polarity Sets the polarity for correct product trigger operation. Use Light On for
normally open triggers, Dark On for normally closed triggers.
Trigger Type Refer to the documentation that came with your trigger for this information.
This is also known as Trigger Sourcing.
Capture Mode Upon detecting the leading edge of a product, the falling edge can be either
the beginning of the next product (Start-to-Start) or the end of the current
product (Start-to-End).
E 2020 Nordson Corporation

Trigger Settings

1. Log into your BBconn Cloud account, then do the following:
S
Select SETUP TOOL - create or load a .NOR file.
S
Select SYSTEM SETTINGS | FLOW.
2. From the Trigger Settings section, enter the following information.
When done, select SAVE.
Description
ProBlue Flex OEM User's Guide
57
Default
Dark
On
PNP
Start-to-
Start
Part 1129255_01