Defining Plc Access - Nordson ProBlue Flex User Manual

76
ProBlue Flex OEM User's Guide
SETUP TOOL
Please select how to load a configuration file
LOAD FROM USB/COMPUTER
USE PREVIOUS FILE
CREATE NEW
SYSTEM SETTINGS
NETWORKING
Part 1129255_01

Defining PLC Access

1. Log into your BBconn Cloud account, then do the following:
S
Select SETUP TOOL - create or load a .NOR file.
S
Select SYSTEM SETTINGS | NETWORKING.
2. Select PLC.
3. Do the following to define to set up your PLC communications:
Option Description
Enable/Disable full
PLC communication
Access access between
the melter and your
PLC Enable/Disable full
Access
Read Only communication
access between
the melter and your
Decide which PLC
data process you
PLC I/O want to use - Index,
Data Full Map (legacy) or
the new Flexible
Import/ Decide whether to
Export Import a flexible
Flexible map configuration
Map
created using
BBconn Cloud into
this melter or export
the .PLC file to a
USB to either
configuration in
BBconn Cloud or to
import this PLC file
into another similar
Default
Enabled
read/write
PLC.
read only
PLC.
Flex
map
Map.
file that was
update the
unit.
Notes
S
Enable provides full
read/write access.
S
Disable prevents all
read/write access.
S
Enable provides
only full read access
if PLC Access is
Enabled.
S
Disable provides
read/write access if
PLC Access is
Enabled.
S
You must use
BBconn Cloud to
generate a
configuration
(flexible map) map
file - .PLC file.
S
The default PLC
name is
Myflexcfg.plc.
S
You cannot rename
this file.
S
From BBconn
Cloud, save file to
the \PLC folder on
the USB drive. If the
folder does not exist,
you must first create
it.
E 2020 Nordson Corporation