Setting Mode - YOKOGAWA ADMAG AXR User Manual

(*1)
Entry Mode
ESC

Setting mode

No
Yes
/SHIFT
DEC
ESC
ESC
Setting mode
No
Yes
/SHIFT
DEC
ESC
ESC
Setting mode
Yess
/SHIFT
DEC
ESC
Setting Mode
ESC
Setting mode
▲ P:Protect
B:Easy Setup
▼ C:Basic Setup
/SHIFT
DEC
To Parameter
Search Mode
ESC
<5. BASIC OPERATING PROCEDURES
SET
The reversed-character (i.e. the cursor position)
indicates the item that is currently selected.
INC
SET DEC /SHIFT INC
INC
SET
INC
SET DEC /SHIFT INC
SET
SET
INC
SET DEC /SHIFT INC
SET
SET
INC
SET DEC /SHIFT INC
F0503-2.ai
(USING THE DISPLAY UNIT)
A screen is displayed to confirm whether or not the
system is to enter Setting Mode.
Press the INC switch and select [Yes].
NOTE
(*1)
The Major Item Parameter which is set just
before will be shown when entrying the Setting
Mode again within 1 minute after returning from
Setting Mode to Display Mode.
When [Yes] has been selected, touch the
switch.
NOTE
When no operations in this display are carried
out for 20 seconds, the system will automatically
return to the Display Mode.
When the operations except
carried out, the system will automatically return
to the Display Mode.
In order to request confirmation, the entire display
flashes on and off.
Touch the SET switch once again at this time to
fix your selection.
NOTE
When no operations in the flashed display
are carried out for 20 seconds, the system will
automatically return to the Display Mode.
When the operations except
out, the system will automatically return to the
Display Mode.
The system enters Setting Mode.
Parameters to be set can be selected.
This completes the procedure for changing from the
Display Mode to the Parameter Search Mode.
5-4
>
SET
switch are
SET
SET are carried
IM 01E30D01-01EN