Table of Contents
Advertisement
Setting the Measurement Mode
IM 767361-01E
• For the MT210
1.
Press MENU.
2.
Use the
and
to set
3.
Use the
and
to set the pressure sample rate (
LOCAL (767370 only).
: 250 ms
: 4000 ms
4.
Use the
and
to set the pressure moving average (
LOCAL.
: Enable pressure moving average.
: Disable pressure moving average
5.
To return to the normal measurement screen, press MENU.
Note
If you set the pressure sample rate to 4000 ms on the 767370, the pressure moving average
is fixed at OFF.
• For the MT210F
You can select from three different measurement modes, normal, medium-
speed, and high-speed.
1.
Press MENU.
2.
Use the
and
to select
3.
Use the
and
to set the measurement mode (
LOCAL.
: Normal measurement mode
: Medium-speed measurement mode
: High-speed measurement mode
If you specified normal mode, proceed to step 4. If you specifiedmedium-speed or
high-speed mode, proceed to step 5.
4.
Use the
and
to set the pressure moving average (
LOCAL.
: Enable pressure moving average
: Disable pressure moving average
5.
To return to the normal measurement screen, press MENU.
• For the MT220
1.
Press MENU.
2.
Use the
and
to select
3.
Use the
and
to set the pressure moving average (
ENTER/LOCAL.
: Enable pressure moving average
: Disable pressure moving average
4.
Use the
and
to set the DMM moving average (
LOCAL.
: Enable DMM moving average
: Disable DMM moving average
5.
To return to the normal measurement screen, press MENU.
Pressure Measurement
, and press ENTER/LOCAL.
) and press ENTER/
, then press ENTER/LOCAL.
), then press ENTER/
, then press ENTER/LOCAL.
), then press ENTER/
) and press ENTER/
) and press ENTER/
), then press
37
Advertisement
Table of Contents
