Table of Contents
Advertisement
5.1
Operating Panel
Configuration and Functions
(1) Data display area
ESC
(3) Display items
0
DEC
(2) Setting switches
(Magnet switches)
ESC
(2) Setting switches
(Push button switches)
(3) Display items
Displayed items and
reversed-character indication
Instantaneous flow rate: %
Actual instantaneous flow rate
Instantaneous flow rate: mA
Bar graph indicating instantaneous
flow rate
Totalized forward-direction flow rate
Totalized reverse-direction flow rate
Totalized differential flow rate
Tag number
Diagnosis of electrode adhesion
Communication
(5) Write Protect
The mark " " is displayed in the "Major item parameter search mode" and "Sub-item parameter search mode"
during acting the write protection. Regarding the procedure for moving to "Parameter search mode", read
Subsection 5.2.1. Regarding "Write Protect", read Chapter 6 Menu P and Subsection 11.3.2.
<5. BASIC OPERATING PROCEDURES
(4) Reversed
character
display
SET
100.0
FR
m
3
/h
100
3274m
3
FTL
/SHIFT
INC
(5) Write
Protect
SET
DEC /SHIFT
INC
F0501.EPS
FR
Displays the instantaneous flow rate for the span as a percentage.
FR
Displays the actual reading for instantaneous flow rate.
Displays the instantaneous flow rate for the span as a current output
FR
value.
Displays the instantaneous flow rate for the span as a percentage using
None
bar graph.
FTL
Displays the totalized value for flow rate in the forward direction.
RTL
Displays the totalized value for flow rate in the reverse direction.
Displays the differential totalized value for flow rate between forward
DTL
totalization and reverse totalization.
TAG
Display the tag number (using up to 16 characters).
Displays the adhesion condition in the form of a bar graph. (Read the
ADH
description for parameters K10 through K17 from Chapter 6 for more
details.)
COM Displays the communication type.
(4)
(USING THE DISPLAY UNIT)
(1) Data display area
1st line (Display Select1), 2nd line (Display
Select2) and 3rd line (Display Select3) can
be displayed using parameter settings. The
content corresponding to selected items is
shown with the reversed-character on the right
of the line.
(2) Setting switch operation
Push
Magnet
switch
switch
ESC
ESC
SET
SET
DEC /SHIFT
DEC /SHIFT
INC
INC
Content
5-2
>
Explanation of Operation
Move the layer up
Move the layer down, select
and confirm
Move the cursor up (for
selection-type parameters)
Move the cursor to the
right(for numeric-type
parameters)
Move the cursor down (for
selection-type parameters)
Increase values (for
numeric-type parameters)
: Display, : Not display
Disp Select2
Disp Select1
Disp Select3
IM 01E30D01-01EN
Advertisement
Table of Contents
