Table of Contents
Advertisement
Item
A flow test near 0, 25, 50, 75, and 100% of the user-specified span is performed
instead of the standard flow test and a test certificate (QIC) is submitted. Specify the
span flow rate and unit when placing an order.
Specify the span (100% flow span) whose corresponding flow velocity lies between
1.0 to 10 m/s and that is less than the maximum line capacity. Selectable range of
flow rate span is showing below.
Five-point
Size: mm (in.)
Calibration in
User-specified
25 (1)
Span (*8)
40 (1.5)
50 (2)
65 (2.5)
80 (3)
100 (4)
150 (6)
200 (8)
Bar-magnet for
operation of
Bar-magnet for operation of magnet switches, with a case.
magnet switches
(*6)
ATEX
ATEX Explosion proof
Certification
Read "HAZARDOUS AREA CLASSIFICATION"
FM Explosion proof
FM Approval
Read "HAZARDOUS AREA CLASSIFICATION"
CSA
CSA Explosion proof
Certification
Read "HAZARDOUS AREA CLASSIFICATION"
IECEx
IECEx Explosion proof
Certification
Read "HAZARDOUS AREA CLASSIFICATION"
TIIS flameproof
TIIS Certification
Read "HAZARDOUS AREA CLASSIFICATION"
(Need to select optional code G11.)
Flameproof
One flameproof packing adapter and one blind plug.
packing adapter
for TIIS Flame-
One flameproof packing adapter addition
proof Type (*7)
*1:
Standard
*2: When specifying the optional code BSC, it is advisable to specify the optional code GA, GC, or GD at the same time to prevent poten-
tial leakage caused by the difference in elasticity between the flowtube and chloroprene gaskets.
*3: Allowable temperature and pressure with the optional code BSC (only for Gaskets: Chloroprene rubber) are equivalent to Valqua
#2010.
*4: Allowable temperature and pressure with the optional code BSF (only for Gaskets: PTFE-sheathed non-asbestos) are equivalent to
Valqua #7030 (S).
*5: Read description of "Gasket" in the "Wetted Part Material".
Special gaskets are inserted between the flowtube and the grounding ring or grounding electrode.
*6: Keep the bar-magnet in the case because of the powerful magnetic force.
*7: For the TIIS flameproof type, select optional code G11. In case of two flameproof packing adapters, select optional code G32 with G11.
Available only for JIS G1/2 female electric connection.
*8: Standard flow test condition is follows;
- General-purpose use (25 to 200 mm)/ Exprosion proof type (25 to 100 mm): span; 2 m/s, test point; 0, 30, 100%
- Exprosion proof type (150, 200 mm): span; 2 m/s, test point; 0, 35, 100%
Specifications
Selectable range of flow rate span: m
(Flow rate span velocity: m/s)
1.77 (1.0) to
11 (6.22)
4.53 (1.0) to
28 (6.30)
7.07 (1.0) to
56 (7.92)
12.0 (1.0) to
80 (6.70)
18.1 (1.0) to
126 (6.96)
28.3 (1.0) to
190 (6.72)
63.6 (1.0) to
380 (5.97)
113 (1.0) to
670 (5.92)
+90-degree
+180-degree
rotation
rotation
Optional Code
Optional Code
RA
RB
<12. OUTLINE>
General
/h
3
–90-degree
rotation
Optional Code
RC
12-15
Applicable
Model
Explosion
proof
Code
○
○
SC
○
○
BM
○
–
KF2
○
–
FF1
○
–
CF1
○
–
SF2
○
–
JF3
○
–
G11
○
–
G32
IM 01E30D01-01EN
Advertisement
Table of Contents
