YOKOGAWA ADMAG AXR User Manual page 48

Major item
Sub-item
Parameter Sub-item
parameter
Search Mode
Major item
Sub-item
selection (A)
Sub-item
Parameter
Current unit setting
Replacement Mode
Available selections
Sub-item
Current unit setting
Available selections
Major item
Sub-item
Parameter
Sub-item
Search Mode
selection (A)
<5. BASIC OPERATING PROCEDURES
B:Easy Setup
50:Auto Zero Exe
10:Language
20:Flow Damping
INC
X2
B:Easy Setup
20:Flow Damping
21:Base Flow Unit
22:Base Time Unit
SET
B21:Base Flow Unit
m 3
m
3
kl(Kiloliter)
INC
B21:Base Flow Unit
m 3
l(Liter)
cm 3
INC
X2
SET
B21:Base Flow Unit
l(Liter)
SET
B:Easy Setup
20:Flow Damping
21:Base Flow Unit
22:Base Time Unit
F0504-2.EPS
(USING THE DISPLAY UNIT)
Sub-item Parameter Search Mode has been
accessed in this screen.
INC
Touch the switch to move the cursor to B21:
Base Flow Unit.
The cursor has been moved to B21: Base Flow
Unit in this screen. (Sub-item selection screen (A))
In this screen, Parameter Replacement Mode has
been called up using the
INC
Touch the switch to move the cursor to the
unit item for selection. In this example, the
switch is touched twice to select l (Liter)
When l (Liter) has been selected, touch the
switch.
In order to request confirmation, the entire display
flashes on and off. Touch the SET
again at this time to fix your selection.
NOTE
When no operations are carried out for 20
seconds in the flashing state, the system will
automatically return to the Sub-item Parameter
Search Mode.
When the operations except
out, the parameter cannot be set.
The system automatically returns to sub-item
selection screen (A).
5-6
>
SET
switch.
INC
SET
switch once
SET
are carried
IM 01E30D01-01EN