Table of Contents
Advertisement
7.3.3 BT200 Setting of Alphanumeric-Type Data: Tag number
In this example, the tag number specified by the alphanumeric-type parameter C10: TAG NO is changed from
"FI-1101" to "FI-1201."
MENU
A:DISPLAY
B:EASY SETUP
C:BASIC SETUP
D:TOTAL SET
E:PULSE SET
F:STATUS FUNC
HOME SET
ADJ
ESC
MENU
A:DISPLAY
B:EASY SETUP
C:BASIC SETUP
D:TOTAL SET
E:PULSE SET
F:STATUS FUNC
HOME SET
ADJ
ESC
PARAM
C10:TAG NO
FI-1201
C11:FLOW DAMPING
5.0s
C20:LOW MF(IEL)
1.0000
DATA DIAG PRNT
ESC
SETTING
C10:TAG NO
FI-1101
FI-1101
CODE CAPS CLR
ESC
SETTING
C10:TAG NO
FI-1101
FI-1201
CODE CAPS CLR
ESC
<7. OPERATION VIA BRAIN TERMINAL (BT200)>
When Menu Screen (Major
Item Parameter Search
Mode) has been entered as
shown here, press the
key twice to move
to C: BASIC SETUP.
When the cursor has been
moved to C: BASIC SETUP,
press the
key to
access Parameter Screen
(Sub-Item Parameter
Search Mode).
The cursor will already be
aligned with C10: TAG NO.
Press the
key to
access Setting Screen
(Parameter Replacement
Mode).
An underscore (small
cursor) will start to flash on
and off at the furthest left
character in the tag number
as displayed in the
data-overwrite section.
Press the
key four
times to move the flashing
underscore (small cursor) to
the position for multiples of
100.
X 4
When the flashing under-
score (small cursor) has
been moved to the position
for multiples of 100, use the
alphanumeric keys to enter
the value "2". (When this
value has been entered, the
underscore will move to the
position for multiples of 10.)
When the tag number has
been corrected to "FI-1201"
in this way, press the
key.
The highlighted data will
SETTING
begin to flash on and off:
C10:TAG NO
FI-1101
Press the
FI-1201
once again to confirm your
entry.
In case of cancel, press the
FEED POFF NO
The tag number has been
SETTING
C10:TAG NO
changed to "FI-1201".
FI-1201
Press
exit Setting Screen
(Parameter Replacement
Mode), and then the display
FEED
NO
OK
returns to Parameter
Screen (Sub-Item
Parameter Search Mode) of
Menu C items.
In case of redo of setting,
press the
to return the Setting Screen
(Parameter Replacement
Mode).
(
The changed setting for tag
PARAM
C10:TAG NO
number can now be
FI-1201
confirmed.
C11:FLOW DAMPING
Press the
5.0s
C20:LOW MF(IEL)
to return to Menu Screen
1.0000
(Major Item Rarameter
DATA DIAG PRNT
ESC
Search Mode).
7-8
key
(
) key.
NO
OK
(
) key to
(
) key
NO
)
OK
(
) key
ESC
F0711.ai
IM 01E30D01-01EN
Advertisement
Table of Contents
