YOKOGAWA ADMAG AXR User Manual page 82

[G42: Alm Record Time1] Display the operation
time of alarm record1
This parameter is used to display the operation time
at which the alarm indicated by G41: Alm Record1
was occurred. For example, "1D23:45" indicates
that an alarm was occured at the operation time of 1
day, 23 hours, and 45 minutes.
IMPORTANT
Use these values as a reference because the
time of alarm records (1 to 4) have an error.
[G43: Alm Record2] Alarm record2
This parameter is used to display the second most-
recent alarm, and the alarms that can be displayed
are the same as those for G41: Alm Record1.
[G44: Alm Record Time2] Display the operation
time of alarm record2
This parameter is used to display the operation time
at which the alarm indicated by G43: Alm Record2
was occurred. For example, "1D23:45" indicates
that an alarm was occured at the operation time of 1
day, 23 hours, and 45 minutes.
[G45: Alm Record3] Alarm record3
This parameter is used to display the third most-
recent alarm, and the alarms that can be displayed
are the same as those for G41: Alm Record1.
[G46: Alm Record Time3] Display the operation
time of alarm record3
This parameter is used to display the operation time
at which the alarm indicated by G45: Alm Record3
was occurred. For example, "1D23:45" indicates
that an alarm was occured at the operation time of 1
day, 23 hours, and 45 minutes.
[G47: Alm Record4] Alarm record4
This parameter is used to display the fourth most-
recent alarm, and the alarms that can be displayed
are the same as those for G41: Alm Record1.
[G48: Alm Record Time4] Display the operation
time of alarm record4
This parameter is used to display the operation time
at which the alarm indicated by G47: Alm Record4
was occurred. For example, "1D23:45" indicates
that an alarm was occured at the operation time of 1
day, 23 hours, and 45 minutes.
<6. PARAMETER DESCRIPTION>
(7) Menu H: Display Setting items
Menu H contains setting items relevant to the
display unit.
[H10: Display Select1] Setting of the first line for
display unit
→ Read the description for parameter B40
This parameter selects the display content of the
first line for display unit.
[H11: Display Select2] Setting of the second line
for display unit
→ Read the description for parameter B41
This parameter selects the display content of the
second line for display unit.
[H12: Display Select3] Setting of the third line for
display unit
→ Read the description for parameter B42
This parameter selects the display content of the
third line for display unit.
[H20: Display Cycle] Setting of the display cycle
This parameter sets the cycle for the display-
response speed of display unit. Settings should
be made in accordance with the measurement
environment by, for example, setting a longer
display cycle when using the equipment in low
temperatures.
[H30: Language] Selection of language used for
the display unit
→ Read the description for parameter B10
This parameter can be used to select the language
for the display unit.
[H40: LCD Contrast] Selection of display contrast
This parameter is used to set the contrast of the
display (21 scales). Its contrast scale becomes
small (bright) when its parameter sets smaller.
Adjust the contrast as needed.
6-31
IM 01E30D01-01EN