Cursors - Teledyne HDO8000A Getting Started Manual

Cursors

Cursors set measurement points on a trace. There are five preset cursor
types, each with a unique appearance on the display: Horizontal (Time),
Horizontal + Vertical, Vertical (Amplitude), Horizontal (Frequency), and
Horizontal (Event). These are described in more detail in the HDO8000A
Oscilloscopes Operator's Manual.
From the Front Panel
A
B
B
A
Press to apply cursor. Continue
pressing to cycle through all
cursor types.
Turn to adjust cursor position.
Push to select different cursor
markers to adjust.
BASICS
From the Display
A
D
B
A
Choose Cursor > Cursor Setup to open the Cursor dialog.
B
Choose Cursor Type.
C Touch-and-drag cursor markers to reposition cursor.
D Vertical Cursor readout appears on descriptor boxes.
E Horizontal Cursor readout appears below Timebase. Drag horizontal
readout to zoom traces to place cursors on zoomed area.
C
E
32