Printing By Touching A Mobile Device To The Machine (Nfc) (Mf729Cx) - Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual

Printing by Touching a Mobile Device to the Machine (NFC)
This machine supports the NFC (Near Field Communication) standards. By touching an NFC compatible mobile device to the NFC mark on
the operation panel of the machine, you can print photos and documents stored in that mobile device.
On where to touch the mobile device, see
Setting the Mobile Device
Set the device so that its NFC function is enabled. For more information, see the instruction manuals for your mobile devices or
contact your manufacturer.
Install Canon Mobile Application on your mobile device. For more information, see the Canon website at: http://www.canon.com/.
Launch Canon Mobile Application.
Required Machine Setting
To print from NFC compatible devices, specify the following settings.
Set <Enable NFC> to <On>.
Set the IP address in IPv4 format.
You can download the application software for free, but you will be charged the Internet connection fee.
If printing does not start, change the position where you touch the mobile device to the machine.
It may take some time before the connection is complete.
Proper operation may not be possible depending on the mobile device.
Operation Panel.
Enable NFC
Setting IPv4 Address
0SCJ-0HF