Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual page 552

<Menu> <Printer Settings>
Offset Long Edge (Front)
Specify the print position by setting the offset value for the long edge on the front side of the paper. Increasing the value moves the
print position downward. Decreasing the value moves the print position upward.
-50.0 to ±0 to +50.0 (mm)
If this setting moves any of the print data outside the printable area, the portion outside the printable area will not be
printed.
<Menu> <Printer Settings>
Offset Short Edge (Back)
Specify the print position by setting the offset value for the short edge on the back side of the paper. Increasing the value moves
the print position to the right. Decreasing the value moves the print position to the left.
-50.0 to ±0 to +50.0 (mm)
If this setting moves any of the print data outside the printable area, the portion outside the printable area will not be
printed.
<Menu> <Printer Settings>
Offset Long Edge (Back)
Specify the print position by setting the offset value for the long edge on the back side of the paper. Increasing the value moves the
print position downward. Decreasing the value moves the print position upward.
-50.0 to ±0 to +50.0 (mm)
If this setting moves any of the print data outside the printable area, the portion outside the printable area will not be
printed.
<Layout> <Offset Short Edge (Front)>
<Layout> <Offset Long Edge (Front)>
<Layout> <Offset Short Edge (Back)>
Specify the offset value <Apply>
Specify the offset value <Apply>
Specify the offset value <Apply>