Specifying Paper Size and Type in the Manual Feed Slot
The screen shown here is displayed when paper is loaded in the manual feed slot. Follow the on-screen instructions to specify settings
that match the size and type of the loaded paper.
If the screen shown above is not displayed when paper is loaded
If you always load the same paper in the manual feed slot, you can skip the paper setting operations by registering the paper
size and type as the default setting. When the default setting is registered, however, the screen shown above is not displayed.
To display the screen, select <Off> for <Register Default Settings> (
Feed Slot).
1
Select the paper size.
If the loaded paper size is not displayed, tap <Other Sizes>.
When loading custom size paper
1
Tap <Custom>.
2
Specify the length of the <X> (shorter) side.
Tap <X>.
Input the length of the <X> side using
3
Specify the length of the <Y> (longer) side.
Tap <Y>.
Input the length of the <Y> side, and tap <Apply>.
Registering Default Paper Settings for the Manual
/
or the numeric keys, and tap <Apply>.
0SCJ-013