Specifying Previously Used Destinations - Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual

Specifying Previously Used Destinations

You can select a destination from the three most previously used destinations. When you specify a previously
used destination, the machine also sets the same scan settings, such as density, used the last time you sent
documents to that destination.
When <Restrict Resending from Log> is set to <On>, you cannot use this feature.
Destinations
Turning OFF the machine or setting <Restrict New Destinations> to <On> deletes the past destinations, and disables this
feature. Limiting Available Destinations
When you specify a destination using this feature, any destinations that you have already specified are deleted.
1
Press and tap <Scan>.
When the logon screen appears, use the numeric keys to enter the user name and password. Then select the authentication
server and press
2
Tap <Destination>
3
Select a destination.
The selected destination and its scan settings are specified. You can also change the settings before sending.
LINKS
Sending Documents as E-mails Directly from the Machine
Sending I-Faxes
Saving Documents Directly to a Shared Folder/FTP Server
. Logging on to Authorized Send
<Recall Set.>.
Disabling Use of Previously Used
0SCJ-06R