Setting A Wait Time For Connecting To A Network - Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual

Setting a Wait Time for Connecting to a Network

When a network is designed to enjoy redundant connectivity with multiple switching hubs or bridges, it must have a mechanism to
prevent packets from looping. One effective solution is to define the role of each switch port. However, communication may still be
disrupted for several tens of seconds immediately after you change the way that network devices are connected, or if you add a new
device. If this type of problem occurs, set a wait time for connecting to the network.
1
Tap <Menu> in the <Home> Screen.
2
Tap <Network Settings>.
If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press
Machine
3
Tap <Waiting Time for Connection at Startup>.
4
Enter the wait time in seconds, and tap <Apply>.
Use / or the numeric keys to enter the time.
LINKS
Configuring Ethernet Settings
Changing the Maximum Transmission Unit
0SCJ-083
. Logging on to the