Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual page 73

<ECM TX>
If an error occurs in an image that is being sent, the error is checked and corrected to prevent an improper image
from being sent when setting <On>.
<TX Speed>
If it takes time for transmissions to start, such as when there is a poor telephone connection, you can adjust the
transmission start speed downward incrementally starting from "33600 bps".
<Long Distance>
Specify <International (1)> to <International (3)> according to the transmission conditions when registering overseas
fax numbers.
You can also specify <ECM TX> and <TX Speed> from <Menu>
from <Address Book> are enabled for the detailed settings of destinations registered in the Address Book.
8
Tap <Apply>.
A three-digit number is automatically set to destinations. The number can be edited after it has been registered.
Editing the Content of Registered Destinations
After registering destinations, you can change type so that a number registered for fax is usable for e-mail, change automatically set
coded dial numbers, and also change, names, types, and coded dial numbers.
1
Press and tap <Address Book>.
2
Tap <Details/Edit>.
3
Select the tab containing the destination you want to edit, and select the destination.
4
Tap <Edit>.
If a screen appears prompting you to enter a PIN, enter the correct PIN using the numeric keys, and tap <Apply>.
PIN for Address Book
5
Select the item you want to edit, perform editing, and then tap <Apply>.
<Fax Settings>. However, settings made
Setting a