Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual page 186

8
Press (B&W) to start sending.
Scanning starts.
When the SMTP authentication screen appears, use the numeric keys to enter the user name and password and then tap
<Apply>.
If you want to cancel sending, tap <Cancel>
When placing documents in the feeder in step 1
When scanning is complete, the I-Fax is sent.
When placing documents on the platen glass in step 1
When scanning is complete, follow the procedures below.
1
If there are additional pages of documents to be scanned, place the next document on the platen glass,
and press (B&W).
Repeat this step until you finish scanning all of the pages.
When there is only one page to be scanned, proceed to the next step.
2
Tap <Start Sending>.
The I-Fax is sent.
If a Send Error Occurs
Error notifications are sometimes sent to the e-mail address set to the machine. You can clear the mailbox on the server from the
Remote UI.
To clear the mailbox
1
Start the Remote UI and log on in System Manager Mode.
2
Click [Settings/Registration].
3
Click [Network Settings]
4
Click [Clear] in [Clear Mail Box].
<Yes>.
[E-Mail/I-Fax Settings].
Starting Remote UI