Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual page 520

Off
On
Drawer 1
Off
On
Drawer 2 *1
Off
On
<Menu>
source Select <Off> or <On>
Functions
Select the function for which you want to configure automatic drawer selection.
Select <Other> for functions such as printing reports and lists and printing images from a USB memory device.
Paper Sources
Select the paper source for which you want to enable.
<Multi-Purpose Tray> is not displayed if <Printer> was selected on the previous screen (
selection is always enabled for printing on paper fed from the manual feed slot.
Switch of the settings
Select <On> to enable automatic drawer selection for the paper source you selected on the previous screen (
Make sure to select <On> for <Drawer 1> or <Drawer 2>. If <Off> is selected for both drawers, you cannot finish
the configuration.
Switch Paper Feed Method
Specify this setting when you print a document on paper with logos. To print on paper with logos, you need to change how the paper
loaded in the paper source is facing depending on whether you are performing 1- or 2-sided printing. However, if you change the setting
to <Print Side Priority>, you can just load the paper face down for both 1- and 2-sided printing. For more information, see
Preprinted Paper.
Multi-Purpose Tray
Speed Priority
Print Side Priority
Drawer 1
Speed Priority
Print Side Priority
Drawer 2 *1
Speed Priority
Print Side Priority
<Menu>
Priority> or <Print Side Priority>
<Common Settings> <Drawer Auto Selection On/Off>
<Apply>
*3
<Common Settings> <Switch Paper Feed Method>
Select the function Select the paper
). Automatic drawer
Select the paper source Select <Speed
).
Loading