Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual page 428

display the
authentication
screen]
When [Only Allow Sending to Myself or Specified Folder] is specified in [File Sending]
[Authentication Method]
Allows you to specify whether an authentication screen is shown on the server when sending.
[Use the same
authentication
information as
when the
sending
operation
started]
[Display the
authentication
screen without
any
authentication
information]
[Specify Destination Folder]
Selecting this check box allows you to specify the folder where the data is saved. If the check box is not selected, the
save destination is set based on authorized user information registered on the LDAP server.
[Host Name]
[Folder Path]
8
Configure the settings for sending faxes.
[Fax Sending]
Select whether to allow sending faxes.
[Do Not Allow]
[Allow]
9
Click [OK].
LINKS
Registering LDAP Servers
Carries out authorization on the server using the user name and password entered in the
Authorized Send logon screen. Selecting the [Display Authentication Screen] check box displays
the authentication screen with this user name and password already entered when you send the
data.
Displays the authentication screen with the user name and password fields blank.
Enter a host name for the shared folder or FTP server up to 120 characters in length.
Enter a path name for the save destination folder up to 120 characters in length (excluding the
host name). When the [Add User Name] check box is selected, the user name and path used for
LDAP authentication are added.
Restricts fax transmissions.
Does not restrict fax transmissions.