Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual page 455

Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
Using the operation panel
You can also enable or disable SSL encrypted communication from <Menu> in the <Home> Screen.
Starting the Remote UI with SSL
If you try to start the Remote UI when SSL is enabled, a security alert may be displayed regarding the security certificate. In
this case, check that the correct URL is entered in the address field, and then proceed to display the Remote UI screen.
Starting Remote UI
Enabling SSL for e-mailing/I-Faxing
If the SMTP server and the POP3 server support SSL, you can enable SSL for communication with these servers
( Configuring E-mail/I-Fax Communication Settings). For more information about the SMTP server and the POP3 server,
contact your Internet service provider or Network Administrator.
LINKS
Generating Key Pairs
Using CA-issued Key Pairs and Digital Certificates
Configuring IPSec Settings
Configuring IEEE 802.1X Authentication
Monitoring and Controlling the Machine with SNMP
Registering LDAP Servers
Use SSL