Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual page 374

To use the POP3 server for authentication, select the check box.
[Use APOP Authentication]
Select the check box to use APOP to encrypt the password during the authentication process.
[Use SMTP Authentication (SMTP AUTH)]
To enable authentication on the SMTP server, select the check box and enter up to 64 characters in the [User Name]
text box.
[Set/Change Password]
To specify or change the password, enter up to 32 characters in the [Password] text box.
[Use SSL for SMTP]
Select the check box to use SSL for encrypting communication with the SMTP server. Select the check box for [Verify
Certificate] or [Add CN to Verification Items] depending on your needs.
[Use SSL for POP]
Select this check box to encrypt communication with the POP server using SSL. Select the [Verify Certificate] and [Add
CN to Verification Items] check boxes as required.
6
Click [OK].
7
Restart the machine.
Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
Depending on the network you are using, you may need to change the SMTP or POP3 port setting (
Numbers). For more information, contact your Internet service provider or Network Administrator.
LINKS
Configuring Scan Settings (Sending E-mail, Sending & Receiving I-Faxes)
Configuring Basic E-mail Settings
Sending Documents as E-mails Directly from the Machine
Using Internet Fax (I-Fax)
Changing Port