Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual page 426

[Display Authentication Screen When Sending Operation Starts]
Select this check box to display the Authorized Send logon screen when the fax or scan function is used (LDAP server
authentication).
[Display Confirmation Screen When Logging Out]
Select this check box to display a screen that allows you to selectively log out when you are logged on for both Authorized Send
and Department ID Management. If you clear this check box, no selection screen is displayed when you log out and you are
logged out from both Authorized Send and Department ID Management.
6
Configure the settings for sending e-mail/I-Faxes.
[E-Mail Sending]
Specify whether the sending of e-mail and I-Faxes is blocked.
[Do Not Allow] Blocks outgoing e-mail and I-Faxes. <E-Mail>/<I-Fax> in the scan function can no longer be selected.
[Allow] Permits outgoing e-mail and I-Faxes.
[Only Allow
Blocks all outgoing e-mail and I-Faxes other than those to users with authorized e-mail addresses. The e-
Sending to
mail addresses of authorized users must be registered on the LDAP server.
Myself]
[Authentication Method]
When [Allow] or [Only Allow Sending to Myself] is selected in [E-Mail Sending], this allows you to specify whether an
authentication screen is shown on the SMTP server when e-mail is sent.
[Display the
authentication
screen using the
same user Displays the authentication screen showing the same user name and password entered in the Authorized
name as when Send logon screen.
the sending
operation
started]
[Display the
authentication
screen without
Displays the authentication screen with the user name and password fields blank.
any
authentication
information]
[Use device-
specific
authentication
No authentication screen is displayed when e-mail or I-Faxes are sent. Authorization on the SMTP server
information and