Installing After Downloading From The Canon Website - Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual

Installing after Downloading from the Canon Website

Install the MF Drivers or MF Scan Utility after downloading the latest version from the Canon website.
Installing the MF Drivers
Installing the MF Scan Utility
Checking the Results of the Installation
When connecting the machine to a computer via a USB cable
Follow the on-screen instructions to connect a USB cable. If a USB cable is connected before the drivers are installed, remove
the cable and re-install the drivers.
A USB cable is not included with the machine. Prepare one separately.
If an older version is already installed, a screen similar to the following appears when installing the new version, and
installation is canceled. Uninstall the older version before installing the new version.
Installing the MF Drivers
1
Prepare to Install.
USB Connection
Turn OFF the machine.
Wired/Wireless LAN Connection
Connect the machine to a computer via the network.
Before starting installation of the drivers, configure network settings. For more information about how to configure network
settings, see "Getting Started".
2
Log on to the computer with an administrator account.
3
Download the drivers from the Canon website (http://www.canon.com/).
For more information about how to download the drivers, see the driver download page for your machine.
4
Double-click the downloaded installer and click [Next].
5
Read the License Agreement, and click [Yes] to agree.
Uninstalling
0UFE-006