Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual page 184

6
Specify the scanning settings as necessary.
Tap the item you want to set.
<Scan Size> Specifying a Scanning Size
<Density> Adjusting Density
<Original Type> Selecting Document Type
<2-Sided Original>(MF729Cx / MF728Cdw / MF724Cdw)
MF724Cdw)
<Sharpness> Adjusting Sharpness
The file name of a scanned document is automatically assigned based on the following format: communication management
number (four digits)_sent date and time_document number (three digits).tif.
Example of file names:
0045_151017190005_001.tif
You cannot specify file names yourself.
7
Specify the subject, body, and reply-to address for the e-mail as necessary.
The subject is set to "Attached Image" by default.
The body is not set by default. Enter it as necessary. Without the body text, only scanned documents are sent.
The reply-to address is not set by default. If you want to specify an e-mail reply-to address that is different than the machine's
e-mail address, specify the address from among those registered in the Address Book. If no destination is registered in the
Address Book, see Registering in the Address Book .
To specify subject/body
1
Tap <Subject/Message>.
2
Tap <Subject>
To send only a one-page document on October 17, 2015 at 07:00:05 PM.
Scanning 2-Sided Documents (MF729Cx / MF728Cdw /