Basic Windows Operations - Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual

Basic Windows Operations

Displaying the Printer Folder
Displaying the [Software Programs/Manuals Setup] Screen
Checking the Bit Architecture
Displaying [Programs and Features] or [Add or Remove Programs]
Displaying the Printer Folder
Windows Vista
[Start] select [Control Panel]
Windows 7/Server 2008 R2
[Start] select [Devices and Printers].
Windows 8/Server 2012
Right-click the lower-left corner of the screen
Windows 8.1/Server 2012 R2
Right-click [Start] select [Control Panel]
Windows Server 2003
[Start] select [Printers and Faxes].
Windows Server 2008
[Start] select [Control Panel]
Displaying the [Software Programs/Manuals Setup] Screen
If your computer does not display the [Software Programs/Manuals Setup] screen after you insert the DVD-ROM, follow the procedure
below. This following example uses "D:" as the name of the DVD-ROM drive. The DVD-ROM drive name may be different on your
computer.
Windows Vista/7/Server 2008/Server 2008 R2
[Start] enter "D:\MInst.exe" in [Search programs and files] or [Start Search]
Windows 8/Server 2012
Right-click the lower-left corner of the screen
Windows 8.1/Server 2012 R2
Right-click [Start] select [Run]
Windows Server 2003
[Start] select [Run] enter "D:\MInst.exe"
Checking the Bit Architecture
If you are not sure whether your computer is running 32-bit or 64-bit Windows, follow the procedure below to check.
1
Display [Control Panel].
Windows Vista/7/Server 2008/Server 2008 R2
[Start] select [Control Panel].
Windows 8/Server 2012
Right-click the lower-left corner of the screen
Windows 8.1/Server 2012 R2
Right-click [Start] select [Control Panel].
2
Display [System].
Windows Vista/7/8/8.1/Server 2008/Server 2008 R2/Server 2012/Server 2012 R2
Click [System and Security] or [System and Maintenance]
Windows Server 2008
[Printer].
select [Control Panel]
[View devices and printers].
double-click [Printers].
select [Run]
enter "D:\MInst.exe" click [OK].
click [OK].
select [Control Panel].
[View devices and printers].
press the [ENTER] key on the keyboard.
enter "D:\MInst.exe" click [OK].
[System].
0UFE-00J