Specifying Destinations In An Ldap Server (Fax) - Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual

Specifying Destinations in an LDAP Server (Fax)

If your office has an LDAP server installed, you can use the destinations registered in the server. To specify
destinations, access an LDAP server via the machine, and then search for a destination.
You need to specify the settings for connecting to an LDAP server beforehand.
1
Press and tap <Fax>.
When the logon screen appears, use the numeric keys to enter the user name and password. Then select the authentication
server and press
2
Tap <Destination>
3
Select the LDAP server you are using.
4
Select the search criteria.
Name, fax numbers, e-mail addresses, organization names, and organization unit are available criteria for searching destinations.
Multiple search criteria can be specified at the same time.
5
Specify the search criteria using the numeric keys, and tap <Apply>.
The following screen shows an example for when <Name> is selected in step 4 to search by personal name.
. Logging on to Authorized Send
<Specify from LDAP Server>.
Registering LDAP Servers
0SCJ-02U