Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual page 269

6
Specify the scanning settings as necessary.
Tap the settings. Specifying Detailed Settings
The file name of a scanned document is automatically assigned based on the following format: communication management
number (four digits)_sent date and time_document number (three digits).file extension.
Example of file names:
0045_151017190005_001.pdf
You cannot specify file names yourself.
7
Specify the subject, body, reply-to address, and priority for the e-mail as necessary.
The subject and the priority are set to "Attached Image" and "Standard" respectively by default.
The body is not set by default. Enter it as necessary. Without the body text, only scanned documents are sent.
The reply-to address is not set by default. If you want to display the reply-to address differently from that of the machine,
specify the address from among those registered in the Address Book. If no destination is registered in the Address Book,
see Registering in the Address Book .
To specify subject/body
1
Tap <Subject/Message>.
2
Tap <Subject>.
3
Enter the subject using the numeric keys, and tap <Apply>.
Tapping <A/a/12> toggles the input modes.
4
Tap <Message>.
If a one-page document is converted into a PDF file and sent on October 17, 2015 at 07:00:05 P.M.