Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual page 509

Select <Off> or <On>
Dedicated Port Settings
Enable or disable the dedicated port. The dedicated port is used when printing, faxing, or scanning uses MF Scan Utility and when
browsing or specifying the machine settings over the network.
Off
On
<Menu>
Waiting Time for Connection at Startup
Specify a wait time for connecting to a network. Select the setting depending on the network environment.
Connecting to a Network
0 to 300 (sec.)
Ethernet Driver Settings
Select the Ethernet type (10BASE-T/100BASE-TX) and the communication mode of Ethernet (half-duplex/full-duplex). You can also view
the MAC address for wired LAN.
MAC Address
Check the MAC address of the machine, which is a number unique to each communication device.
Wired LAN
Auto Detect
Select whether to automatically detect or manually select the communication mode and the Ethernet type.
Settings
Off
Communication Mode
Half Duplex
Full Duplex
Ethernet Type
10BASE-T
100BASE-TX
On
*2
IEEE 802.1X Settings
Enable or disable IEEE 802.1X authentication.
Off
Restart the machine
<Network Settings> <Dedicated Port Settings>
Configuring IEEE 802.1X Authentication
Select <Off> or <On> Restart the machine
Setting a Wait Time for
Viewing the MAC Address for
Configuring Ethernet