Printer Settings - Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual

Printer Settings

All the settings about the printer are listed with short descriptions. Default settings are marked with a dagger
( ).
*
Asterisks ( )
*1
Settings marked with " " are only available when the optional paper drawer (drawer 2) is attached.
Settings marked with " " are only available for the MF729Cx / MF728Cdw / MF724Cdw. *2
*3
Settings marked with " " are only available for the MF729Cx.
Priority of settings
Settings that are specified in an application or on the printer driver will override those specified on the machine. The settings
described in this section are especially useful if you are printing on an operating system such as UNIX on which the printer
drivers for the machine are not available.
Availability of settings
All the printer settings described in this section, except for <Paper Size Override> (
available for PCL printing. Specifying these settings is unnecessary, for example, when you print using the UFRII LT printer
driver.
Prioritize Driver Settings When Printing
Copies
2-Sided Printing
Default Paper
Paper Size Override
Print Quality
Layout
Auto Error Skip
Timeout
Personality
Color Mode
Gradation Settings
Compressed Image Output
PCL
PS
Prioritize Driver Settings When Printing
If set to <On>, settings in the printer driver for paper size and type take priority over the machine's settings when printing. Settings can
be configured individually for the paper drawer and manual feed slot. An error message can be set to display if the loaded paper size or
type are different from that set in the printer driver.
Multi-Purpose Tray
Off
On
Force Output
Display Error
Drawer 1
Off
On
Force Output
Display Error
Drawer 2 *1
Off
On
Force Output
Display Error
Paper Size Override), are only
0SCJ-0AH