Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual page 605

Connect again by selecting a wireless router or by manually changing the WEP authentication method to <Open
System>.
Setting Up Connection by Selecting a Wireless Router
Setting Up Connection by Specifying Detailed Settings
The authentication method of the machine is set to <Shared Key>, but that of the wireless router is set to
"Open System."
Change the WEP authentication method to "Shared Key" at the wireless router, and connect again. For more
information about how to change, see the instruction manuals for your networking devices or contact your
manufacturer.
End of Toner Cart. Lifetime
The toner cartridge has reached the end of its lifetime.
Select one of the settings on the display.
To display the replacement method, select <Display Recovery Steps> on the screen.
If you select <Continue Printing (Quality Not Guaranteed)>, you can continue printing, but the machine may
malfunction.
If the yellow, magenta, or cyan toner cartridge has reached the end of its lifetime and you select <Only
Continue Black & White Printing>, you can continue black and white printing only.
Faxing is restricted.
Faxing is disabled in the Department ID Management.
Log on with a Department ID for which faxing is not disabled. For the Department ID and PIN, contact your
Administrator.
Setting the Department ID Management
Magenta cartridge has reached the end of its lifetime.
The toner cartridge has reached the end of its lifetime.
Replacement of the toner cartridge is recommended.
How to Replace Toner Cartridges
Memory full. Check error info. using the Status Monitor key.
The memory became full of print data that could not be printed due to errors.
MF729Cx / MF728Cdw / MF724Cdw
Cancel printing of the documents with errors.
Canceling Prints
MF628Cw / MF623Cn