Preparing To Use The Machine As A Scanner - Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual

Preparing to Use the Machine as a Scanner

Make sure that the machine and your computer are connected and all software is installed. To connect via a wireless or wired LAN, you
must register this machine in MF Network Scanner Selector. Register by following the procedure below. This procedure is not required if
the machine and your computer are connected via USB.
The scan function is not available if the machine and your computer are connected in an IPv6 environment. Use IPv4 or a USB
connection.
1
Click in the system tray.
2
Select the check box for the machine, and click [OK].
Up to 10 scanners on a network can be registered on a computer.
0SCJ-05H