Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual page 553

<Menu>
Auto Error Skip *2
Select whether to automatically perform error skip to bypass errors and continue printing when an error occurs with the print data. If
<Off> is selected, you can perform error skip by using the operation panel.
Off
On
Error skip bypasses errors in print data, so the document may not be printed correctly.
You can manually perform error skip.
<Copy/Print Job>
<Menu>
*2
Timeout
Set the time period after which the machine deletes incomplete print data from memory. The machine deletes incomplete print data
because it may have some errors and prevent the machine from printing the next document.
5 to 15 to 300 (sec.)
Provide the machine with enough time to receive all the print data from the computer, especially when printing large
amounts of data. If you specify a time period that is too short, the machine may not receive all the print data in time for
printing.
<Menu>
Personality *2
This setting enables the machine to process data received from the host computer in the specified data format. Setting the Personality
mode to <Auto> makes the machine determine the type of data received from the host on a job-by-job basis. If you are printing from
applications on a computer, we recommend that you use <Auto>.
<Printer Settings> <Layout>
<Job Status> Select the document containing errors
<Printer Settings> <Auto Error Skip>
<Printer Settings> <Timeout>
<Offset Long Edge (Back)>
Select <Off> or <On>
Set the time period <Apply>
Specify the offset value <Apply>
<Skip Error>