Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual page 503

Wireless LAN routers that can access the machine are automatically located, so you can select from the list. You must manually
enter a network key, such as a WEP key or a PSK.
Enter Manually
Select to configure a wireless connection by manually entering an SSID. By using this method, you can specify authentication and
encryption settings in detail.
Security Settings
None
WEP
Open System
Select WEP Key: 1/2/3/4
Edit WEP Key
Shared Key
Select WEP Key: 1/2/3/4
Edit WEP Key
WPA/WPA2-PSK
Auto
AES-CCMP
Power Save Mode
Select whether or not the machine enters Power Save Mode based on signals emitted from the wireless router.
Off
On
<Menu>
Save Mode>
Connection Information
Select to view the current wireless LAN settings.
MAC Address
Wireless LAN Status
Latest Error Information
Channel
SSID Settings
Security Settings
Power Save Mode
Enable Direct Connection
Set whether to connect directly. By enabling this function, connecting directly with the machine is possible even in an environment
without an access point or wireless LAN router.
MF728Cdw / MF724Cdw / MF628Cw)
Off
On
Setting <Enable Direct Connection> to <On> prevents use of a wired LAN or any wireless LAN other than Direct
Connection.
TCP/IP Settings
Specify settings for using the machine in a TCP/IP network, such as IP address settings.
Setting Up Connection by Specifying Detailed Settings
<Network Settings> <Wireless LAN Settings>
Select <Off> or <On>
Viewing Network Settings
*1*2
Configuring the Settings for Direct Connection (Access Point Mode) (MF729Cx /
Setting Up Connection by Selecting a Wireless Router
Read the displayed message <OK> <Power