Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual page 408

1
Click [Edit] in [Sleep Mode Notification Settings].
2
Select the [Notify] check box and specify the required settings.
[Notify]
Select the check box to notify a device management software of the power status of the machine. When [Notify]
is selected, you can expect the machine to avoid unnecessary communication during sleep mode and reduce the
total power consumption.
[Port Number]
Change the port number for this function according to the network environment.
[Number of Routers to Traverse]
Specify how many routers the notification packets can pass. Enter a number from 0 to 254.
[Notification Interval]
Specify how often the machine notifies a device management software of its power status. Enter a number in
seconds from 60 to 65535.
3
Click [OK].
5
Restart the machine.
Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
Configuring Settings for iW Management Console Plug-ins
You can specify the settings to enable communication between the machine and the following plug-ins, which are used to manage the
Address Book and the setting values of the machine.
iW Management Console Address Book Management Plug-in
iW Management Console Device Configuration Management Plug-in
1
Start the Remote UI and log on in System Manager Mode.
2
Click [Settings/Registration].
Starting Remote UI