Configuring Printer Settings On The Machine - Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual

Configuring Printer Settings on the Machine

When you print a document from a computer, you can specify many print settings, such as the number of copies or color mode, in the
application you used to make the document or on the printer driver. However, the <Paper Size Override> setting described below can
only be specified on the machine.
<Paper Size Override>
Select whether to switch between printing on A4 and Letter size paper if one of these paper sizes is loaded but the other is not. For
example, if you are printing a Letter size document but only A4 paper is loaded in the machine, the machine will print your document on
A4 paper.
<Menu> <Printer Settings>
<Off>
Does not perform paper size substitution. Printing stops and an error message is displayed when the machine runs out of the
paper that has been specified.
<On>
Performs paper size substitution. However, if no paper to substitute is loaded in any paper sources, the substitution cannot be
performed.
Other Printer Settings
There are other printer settings you can specify on the operation panel of the machine. These settings are applied only for PS/PCL
printing. Printer Settings
Priority of settings
When a particular setting can be specified either on the machine, or in an application or on the printer driver, the settings
made in the application or on the printer driver will override those specified on the machine.
LINKS
Printing a Document
Various Print Settings
<Paper Size Override> Select <Off> or <On>
0SCJ-050