Logging On To The Machine - Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual

Logging on to the Machine

If Department ID Management is enabled or System Manager IDs are enabled, you must log on before using the machine. You also need
to log on if use of the fax and scan functions is restricted.
Department ID Management logon
Logging on to Authorized Send
Department ID Management logon
When the logon screen appears, use the procedure below to enter the Department ID and PIN.
If the screen is displayed prompting you to insert a control card, see
1
Enter an ID.
1
Tap <Department ID> or <System Manager ID>.
2
Enter a ID using the numeric keys, and tap <Apply>.
If no PIN is registered, proceed to step 3.
2
Enter the PIN.
1
Tap <PIN>.
2
Enter a ID using the numeric keys, and tap <Apply>.
3
Press .
The logon screen will be changed to the <Home> Screen.
After you finish using the machine, press
Logging on to Authorized Send
If the Send function authorization setting (
again to display the logon screen.
LDAP Server Authentication ) is enabled, the Authorized Send logon screen appears when
Optional Items.
0SCJ-00R