Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual page 271

2
Select a priority level.
8
Press to start sending.
Scanning starts.
When the SMTP authentication screen appears, use the numeric keys to enter the user name and password and then tap
<Apply>.
If you want to cancel sending, tap <Cancel>
When placing documents in the feeder in step 1
When scanning is complete, the e-mail is sent.
When placing documents on the platen glass in step 1
When scanning is complete, follow the procedures below.
1
If there are additional pages of documents to be scanned, place the next document on the platen glass,
and press
Repeat this step until you finish scanning all of the pages.
When there is only one page to be scanned, proceed to the next step.
2
Tap <Start Sending>.
The e-mail is sent.
If a Send Error Occurs
Error notifications are sometimes sent to the e-mail address set to the machine. You can clear the mailbox on the server from the
Remote UI.
To clear the mailbox
1
Start the Remote UI and log on in System Manager Mode.
2
Click [Settings/Registration].
3
Click [Network Settings]
<Yes>.
.
[E-Mail/I-Fax Settings].
Starting Remote UI