Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual page 526

Select the type of PBX you are using. If you select <Prefix>, register the prefix code on the next screen
<Code>
Enter the prefix code using the numeric keys, tap <Pause>, and then tap <Apply>. If you do not insert a pause, the
prefix code is not registered.
Archive TX Document
In addition to the destination specified when the fax is sent, you can specify whether faxed documents are also sent to a preset
storage address for archiving.
Off
On
TX Function Settings
Specify settings for sending faxes.
Change Default Settings
Specify settings used for sending faxes. The selected settings are used as the default settings when scanning documents.
Changing Default Settings
Resolution
200 x 100 dpi (Normal)
200 x 200 dpi (Fine)
200 x 200 dpi (Photo)
200 x 400 dpi (Superfine)
400 x 400 dpi (Ultrafine)
Density
Nine Levels
*3
2-Sided Original
Off
Book Type
Calendar Type
Sharpness
Seven Levels
Register Unit Name (Fax)
Register the name of a company or person.
The registered name is sent as sender information to the destination.
ECM TX
Enable or disable error correction mode (ECM). ECM checks for fax data errors and corrects them. To reduce errors on received
faxes, see ECM RX.
Off
On
ECM must be enabled on both the machine and the other fax device because error checks are performed on both the
sending and receiving devices.
Even when ECM is enabled, errors may occur due to telephone line conditions.
It may take a longer time than usual to process data when ECM is enabled because the error checks and corrections are
performed while the data is transmitted.
<Menu>
*2
Archiving Sent Faxes
Registering the Fax Number and Unit Name
<Fax Settings> <TX Function Settings>
TX Terminal ID
<ECM TX> <On>