Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual page 246

Scan>
<Custom 1>
<Custom 2>
*1
Documents are scanned in black and white only, with no intermediate shades of gray.
*2
A PDF format where characters on the document are scanned as text data and the text can be searched using a computer.
To change settings
You can change settings from MF Scan Utility. For more information, see [Instructions] on MF Scan Utility.
If you are a Mac user, see Canon Scanner Driver Guide.
6
Press .
Scanning starts.
To cancel, tap <Cancel>
You cannot scan while the ScanGear MF is displayed. Close the screen before scanning.
When placing documents in the feeder in step 1
When scanning is complete, the save destination folder is displayed on the computer.
When placing documents on the platen glass in step 1
When scanning is complete, follow the procedure below (except if you selected JPEG as a file format).
1
If there are additional pages of documents to be scanned, place the next document on the platen glass,
and press
Repeat this step until you finish scanning all of the pages.
When there is only one page to be scanned, proceed to the next step.
2
Tap <Finish>.
The save destination folder is displayed on the computer.
About the save destination folder
By default, the scanned data is saved to the My Documents folder. A subfolder named with the scanning date is created, and
the data is saved to that folder.
You can change the save destination from the MF Scan Utility. Refer to the MF Scan Utility help for details.
*1
Black and white
Color
Color
<Yes>.
.
300 dpi
compression
300 dpi JPEG/Exif
300 dpi JPEG/Exif
For Mac OS Users