Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual page 407

4
Specify SLP settings.
Specifying multicast device discovery
1
Click [Edit] in [Multicast Discovery Settings].
2
Select the [Respond to Discovery] check box and specify the required settings.
[Respond to Discovery]
Select the check box to set the machine to respond to device management software multicast discovery packets
and enable monitoring by device management software.
[Scope Name]
To include the machine into a specific scope, enter up to 32 characters for the scope name.
3
Click [OK].
To change the port number for multicast discovery, see
Notifying a device management software of the power status of the machine
Changing Port Numbers.