Specifying Destinations In An Ldap Server (Fax) - Canon MF8580Cdw Manual

Hide thumbs Also See for MF8580Cdw:
Table of Contents

Advertisement

Specifying Destinations in an LDAP Server (Fax)

NOTE
You need to specify the settings for connecting to an LDAP server beforehand.
Registering LDAP Servers (MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw Only)
1
Press
.
2
Use
/
to select <Specify from LDAP Server>, and press
3
Select the LDAP server you are using, and press
4
Select the search criteria, and press
Personal names, fax numbers, e-mail addresses, organization names, and department names are available criteria for searching
destinations. Multiple search criteria can be specified at the same time.
5
Specify the search criteria using the numeric keys, and press <Apply>.
The following screen shows an example for when <Name> is selected in step 4 to search by personal name.
Pressing <A/a/12> toggles the input modes (except for searching by fax number).
To specify multiple search criteria, repeat steps 4 and 5.
6
Select <Search Method>, and press
Downloaded from ManualsPrinter.com Manuals
If your office has an LDAP server installed, you can use the destinations registered in the server. To specify
destinations, access an LDAP server via the machine, and then search for a destination.
.
.
.
.
0ALJ-03F

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Mf8280cwMf8550cdnMf8540cdnMf8230cn

Table of Contents