2-Wire Modular Pcb Connector; Connection For The External Power Supply; Table 6: Legend For Figure "2-Pole, 2-Wire Modular Pcb Connector For - WAGO EnOcean RS-485 Manual

WAGO I/O System 750
750-940 EnOcean RS-485 Gateway; 868 MHz
3.2.1

2-Wire Modular PCB Connector

The external power supply is connected by two-conductor modular PCB
connectors.
Figure 6: Two-Conductor Modular PCB Conductors (Example)
Additional information is available in Sections "Technical Data" and "Connecting
Devices."
3.2.1.1

Connection for the External Power Supply

The connection for the external SELV power supply is made through a 2-pole, 2-
wire modular PCB connector that accepts the individual single strand and is
plugged into the 2-pole PCB male header X1 of the EnOcean Gateway; see
Figure "Connections on the EnOcean Gateway."
Figure 7: 2-Pole, 2-Wire Modular PCB Connector for Connecting the Power Supply
Table 6: Legend for Figure "2-Pole, 2-Wire Modular PCB Connector for Connecting the Power Supply
Position
1
2
Meaning Description
V Power supply socket
CC
GND Socket for connecting power supply and RS-485
communication
Version 1.3.0, valid from FW/HW Version 01/01
List of Figures 19
Manual